본문 바로가기
소형차 2륜

하이브리드 스쿠터(오토바이) - 피아지오 MP3 하이브리드 - Piaggio MP3 Hybird Scooter - 삼륜 스쿠터

by 3sun 2009. 7. 13.
플러그인 하이브리드 스쿠터 = 휘발유엔진 + 전기 모터(리튬이온 배터리)
연비 60km/l (141mpg)
220V 콘센트 약 3시간 정도면 완충. 2시간 85% 충전.

전기모터를 이용해서 후진도 가능.

7월 14일 이탈리아 로마, 8월 유럽 전역 출시
판매 가격 1만2500달러 (약 1600만원). 같은 모델의 기존 가솔린 엔진 가격 : 7100~9000달러
2010년 미국 출시 예정
사용자 삽입 이미지
사용자 삽입 이미지
사용자 삽입 이미지
사용자 삽입 이미지
사용자 삽입 이미지
사용자 삽입 이미지

피아지도 MP3 hybrid 소개 동영상


위와 똑같은 내용인데 뒤쪽이 잘려서, 내용이 전부있는 이태리어 판도 함께


Piaggio MP3 Hybrid – Technical Specifications

Internal combustion engine capacity: 124 cc (bore x stroke - 57 x 48.6 mm)
Thermodynamic cycle: Otto cycle – 4 stroke
Valve gear: Single overhead cam, four valves
Cooling system: Liquid
Ignition system: Inductive discharge digital electronic ignition
Hybrid powertrain power: 11 kW (15 CV) at 8,500 rpm
Hybrid powertrain torque: 16 Nm at 3,000 rpm
Electric motor: Synchronous brushless permanent magnet motor
Power supply voltage: Three-phase alternating current
Electric motor control: Digitally controlled inverter
Electric motor cooling system: Air
Electric motor power: 2.6 kW (3.5 CV)
Electric motor torque: 15 Nm
Drive modes 4 modes: 2 hybrid, 2 electric (including reverse)
Battery charge modes: During braking and deceleration on the move, and from the mains (battery charger integrated in on-board electronics)
Traction batteries: Lithium ion batteries
Transmission: Variator with centrifugal and torque control
Engine control system: Ride-by-Wire with closed loop fuel injection system
Exhaust: Catalytic converter
Chassis: Double cradle in high strength tubular steel
Front suspension: Articulated quadrilateral consisting of four aluminium arms sustaining two steering tubes, and pull rod suspension geometry with offset wheel axle
Rear suspension: Two dual action hydraulic shock absorbers with adjustable spring preload
Front brake: Two 240 mm Ø stainless steel discs and floating calliper with two 30 mm Ø pistons
Rear brake: 240 mm Ø stainless steel disc and calliper with horizontally opposed 30 mm Ø pistons
Front wheel rim: Die-cast aluminium alloy 12" x 3.00
Rear wheel rim: Die-cast aluminium alloy 14" x 3.75
Front tyre: Tubeless 120/70-12”
Rear tyre: Tubeless 140/60-14”
Length/Width: 2,140 mm / 760 mm
Wheelbase: 1,490 mm
Seat height: 780 mm
Fuel tank capacity: 12 litres (including 1.8 litre reserve)
Consumption: (2/3 of cycle in hybrid mode – 1/3 in electric mode) 60 km/l
CO2 emissions: (2/3 of cycle in hybrid mode – 1/3 in electric mode) 40 g/Km
Emissions: compliance Euro3

http://www.uk.piaggio.com/en_UK/news/piaggio_mp3_hybrid.aspx